Related Products
Mini Mecha V9 and Keychain
MiniDrake V9 – Recommended Print Settings
Layer Height: 0.1 for finer detail – 0.2 mm for faster print Wall Line Count: (MIN) 4 for strength Infill: 15 - 20%
Top Layers: 5
Bottom Layers: 4
Notes
- No supports required
- No brim needed
- A raft isn’t necessary unless your build surface is unreliable
MiniDrake V9 Keychain – Recommended Print Settings
Layer Height: 0.12–0.2 mm
Wall Line Count: (MIN) 4 for strength Infill: 20–30% (for extra durability on the ring loop)
Top Layers: 4
Bottom Layers: 4
Notes
- Prints cleanly without supports
- Brim optional if your printer struggles with small contact patches
- Raft only recommended for warped or worn build plates
Frostbite Mini Keychain Articulated Dragon
A compact, poseable, and fully print‑ready dragon designed as both a mini display piece and a durable keychain companion. This downsized Frostbite keeps all the icy attitude of the original while being optimized for fast, support‑free printing and everyday carry.
Born from the heart of a frozen cavern, Frostbite Mini still carries the chill of eternal winter. Even at this smaller scale, its coiled body and crystalline spines shimmer like freshly cracked ice. Some say travellers keep it as a charm for safe passage through storms; others claim it whispers the first signs of winter.
Features
- Articulated & Print‑in‑Place – Comes off the printer ready to flex, even at mini scale.
- Keychain‑Ready – Reinforced loop and compact proportions make it perfect for bags, keys, or zipper pulls.
- Fantasy Detailing – Icy horns, jagged spines, and a tight serpentine coil preserved in miniature.
- Customizable Finish – Shimmering blues, frosty whites, translucent blends, or color‑shift filaments all look magical.
Recommended Print Settings Optimized for small‑scale reliability and crisp detail:
- Layer Height: 0.2 mm (0.16 mm for extra‑smooth scales)
- Infill: 20–25% (gyroid or cubic for strength without bulk)
- Walls/Perimeters: 3–4 walls for durability, especially around the keychain loop
- Supports: None required (fully print‑in‑place)
- Bed Adhesion: Brim or skirt if your printer prefers it
- Material: PLA or PETG; silk, translucent, or icy‑blue filaments enhance the frosty look
- Print Speed: 50–60 mm/s for clean articulation at small scale
Serenith is a gentle, radiant Valentine‑themed dragon known for her calm energy and shimmering crystal accents. She’s designed as a print‑in‑place articulated dragon, with smooth movement right off the build plate and a faceted style that shows beautifully in any filament.
Print Notes (Print‑in‑Place Dragon)
• Layer Height: 0.16–0.20 mm
• Walls: 2–3 perimeters
• Infill: 10–15%
• Material: PLA or PETG
• Supports: Dragon - NONE
• Horns: Printed separately and require a small amount of support
Serenith is easy to print, fun to pose, and makes a perfect seasonal companion or collectible.
Voidcarver Articulated Print-in-Place DragonA legendary entity from the Mesh Mayhem Realms, the Voidcarver Serpent is born from the fractures between finished models and forgotten ideas. Its jagged, carved‑from‑nothing body embodies the chaos of creation itself — a perfect addition to any maker’s collection.
Layer Height: 0.16–0.20 mm No Supports: Fully print‑in‑place by design. Infill: 10–15% Walls/Perimeters: 2–3 Bed Adhesion: None or minimal (skirt recommended)