Mini Mecha V9 and Keychain

MiniDrake V9 – Recommended Print Settings

Layer Height: 0.1 for finer detail – 0.2 mm for faster print Wall Line Count: (MIN) 4 for strength Infill: 15 - 20%
Top Layers: 5
Bottom Layers: 4

Notes

• No supports required
• No brim needed
• A raft isn’t necessary unless your build surface is unreliable

MiniDrake V9 Keychain – Recommended Print Settings

Layer Height: 0.12–0.2 mm
Wall Line Count: (MIN) 4 for strength Infill: 20–30% (for extra durability on the ring loop)
Top Layers: 4
Bottom Layers: 4

Notes

• Prints cleanly without supports
• Brim optional if your printer struggles with small contact patches
• Raft only recommended for warped or worn build plates

Frostbite Mini Keychain Articulated Dragon

A compact, poseable, and fully print‑ready dragon designed as both a mini display piece and a durable keychain companion. This downsized Frostbite keeps all the icy attitude of the original while being optimized for fast, support‑free printing and everyday carry.

Born from the heart of a frozen cavern, Frostbite Mini still carries the chill of eternal winter. Even at this smaller scale, its coiled body and crystalline spines shimmer like freshly cracked ice. Some say travellers keep it as a charm for safe passage through storms; others claim it whispers the first signs of winter.

Features

• Articulated & Print‑in‑Place – Comes off the printer ready to flex, even at mini scale.
• Keychain‑Ready – Reinforced loop and compact proportions make it perfect for bags, keys, or zipper pulls.
• Fantasy Detailing – Icy horns, jagged spines, and a tight serpentine coil preserved in miniature.
• Customizable Finish – Shimmering blues, frosty whites, translucent blends, or color‑shift filaments all look magical.

Recommended Print Settings Optimized for small‑scale reliability and crisp detail:

• Layer Height: 0.2 mm (0.16 mm for extra‑smooth scales)
• Infill: 20–25% (gyroid or cubic for strength without bulk)
• Walls/Perimeters: 3–4 walls for durability, especially around the keychain loop
• Supports: None required (fully print‑in‑place)
• Bed Adhesion: Brim or skirt if your printer prefers it
• Material: PLA or PETG; silk, translucent, or icy‑blue filaments enhance the frosty look
• Print Speed: 50–60 mm/s for clean articulation at small scale

Serenith is a gentle, radiant Valentine‑themed dragon known for her calm energy and shimmering crystal accents. She’s designed as a print‑in‑place articulated dragon, with smooth movement right off the build plate and a faceted style that shows beautifully in any filament.

Print Notes (Print‑in‑Place Dragon)
•     Layer Height: 0.16–0.20 mm
•     Walls: 2–3 perimeters
•     Infill: 10–15%
•     Material: PLA or PETG
•     Supports: Dragon - NONE
•     Horns: Printed separately and require a small amount of support

Serenith is easy to print, fun to pose, and makes a perfect seasonal companion or collectible.

Voidcarver Articulated Print-in-Place DragonA legendary entity from the Mesh Mayhem Realms, the Voidcarver Serpent is born from the fractures between finished models and forgotten ideas. Its jagged, carved‑from‑nothing body embodies the chaos of creation itself — a perfect addition to any maker’s collection.

Layer Height: 0.16–0.20 mm No Supports: Fully print‑in‑place by design. Infill: 10–15% Walls/Perimeters: 2–3 Bed Adhesion: None or minimal (skirt recommended)

Introducing the Crimson Rend Dragon, a fully articulated, print‑in‑place creature engineered for makers who love bold silhouettes and smooth, reliable movement. Its jagged, armor‑like segments create a dramatic, battle‑forged profile while still printing cleanly on most FDM machines.

Perfect as: A striking desk companion A fidget display piece A standout creature in any fantasy collection A customizable base for themed variants Designed with optimized joints for consistent articulation, the Crimson Rend Dragon prints in one piece with no supports.

Filament: Matte Red Shiny Silk Red Black Duo

Recommended Settings Layer Height: 0.16–0.20 mm Supports: None Infill: 15-20% Walls: 2–3 Speed: 45–60 mm/s Bed Adhesion: Skirt recommended Material: PLA preferred; PETG works but may tighten joints Scaling Notes 100%: Ideal articulation and detail 150–200%: Hero‑scale display piece 80%: Still articulates, but joints become more delicate

Poseable, modular, and print‑ready dragon with icy spines and a coiled body. Designed for easy 3D printing, no supports required. Perfect collectible for fantasy fans and articulated toy lovers.

Born from the heart of a glacier, Frostbite carries the bite of eternal winter. Wherever it coils, the air grows colder and the ground sparkles with frozen crystals. Some say it guards treasures buried deep beneath the snow, others whisper it’s the herald of winter itself.

Features

Articulated & Print‑in‑Place – No assembly required; Frostbite comes off the printer ready to flex.

Fantasy Detailing – Spiked scales, icy horns, and a serpentine tail for maximum visual impact.

Customizable – Print in shimmering blues, frosty whites, or experiment with color‑shift filaments for magical effects.

Recommended Print Settings

For best results when printing Frostbite:

Layer Height: 0.2 mm (0.16 mm if you want extra smooth detail)

Infill: 15–20% (gyroid or cubic works well)

Supports: None needed (designed for print‑in‑place)

Bed Adhesion: Standard brim or skirt if your printer needs it

Material: PLA or PETG; translucent or silk filaments look especially icy

Print Speed: 50–60 mm/s for reliable articulation